Anesthesia > Regional Anesthesia Needles

Single Injection

ProBloc Single Injection Regional Block Needles

Peripheral Nerve Block Needles
Life-Tech's insulated nerve block needles are available in three styles and three tip designs. Each style and tip design is available in several gauges and lengths to meet the requirements of a wide variety of nerve block procedures. Medical grade insulation on all needles localizes the stimulating current to the needle tip.

Laser-Stripping Technology

Provides clean insulation removal with sharp, defect-free boundary.
Creates limited conductive area on lumen side of needle tip to localize stimulation to the anesthetic's exit point.
Produces consistent conductive areas in different size needles insuring repeatable stimulation characteristics from procedure to procedure.

Needle Tip Designs (as shown in the selection chart below)
Block Bevel with Sleeve Insulation

Provides maximum uninsulated tip exposure.

Block Bevel Laser-Stripped Tip

Meets requirements of anesthesiologists who prefer a blunter needle tip to minimize nerve trauma.
Provides precise stimulation pattern for tip placement.

Chiba Tip with Ground Conductive Area

Meets requirements of anesthesiologists who prefer a sharper needle to minimize tissue trauma and maximize needle control.

Transparent, Ergonomically Designed Hub

Molded arrow provides both visual and tactile indication of bevel orientation.
Easy to hold and manipulate.
Enables easy observation of aspirated blood without contaminating the injection tubing set.

ProBloc™ Single Injection Needles
Available in Three Configurations

HN1 Style - Needle Only

HN2 Style - Needle with Injection Tube Attached

HN3 Style - Injection Tube and Stimulating Cable Attached

ProBloc SC Design
25 gauge and block-bevel point make these the needles of choice for procedures like:

Interscalene approach to the brachial plexus,
Pediatric regional blocks,
Botox blocks.

ProBloc™ Needle Selection
All needles packaged 10 per box.

Peripheral Nerve Block Support Tray (CPNB-1)

This is a support tray that contains the components necessary to perform a peripheral nerve block and while it has a "C" for continuous, it can also be used for single injection blocks. It is CE marked and contains no latex. It does not include the needle or needle/catheter set.

Small size reduces storage requirements
Contains only components needed for PNB
“Combine a needle” reduces purchasing and stocking requirements for each gauge and length iteration.

Includes:
Drape: 24” X 32” W/5” Fenestration
Dressing: Steristrip (4)
Dressing: Tegaderm
Drug: 1% Lidocaine. 5mL, Ampule
Filter: 5 Micron, 1.75” Straw
Marker: Skin
Needle: 18g X 1.5”
Needlevise: 5 Port
Sponge: Gauze 4” X 4” 8 Ply (6)
Swabstick: W/Providone
Syringe: 3cc W/25g X 1.5” Needle
Towel: 13” X 19”, Grn Paper
Tray: Prep
Wrap: Sterilization, 30” X 30”
Syringe: 10cc
Syringe: 20cc
Stopcock: 4-Way